1.8" LCD module 128x160px with ST7735S controller for tester GM328A and Arduino

1.8" TFT LCD module 128x160px with ST7735S controller for tester GM328A and Arduino projects

Features:
- Matrix:
    - 1.8" (inch) TFT LCD
    - resolution 128 x 160 pixels
    - dimensions 28.03 x 35.04 millimeters
- Controller (driver): Sitronix ST7735S, SPI (serial) interface
- Backlight: 2 pcs. LED 30mA
- Power supply voltage (VCC): 2.8V ~ 3.3V
- Consumed power: 0.11W
- Connector: FPC cable, 18 pins, pitch 0.8mm, connection by soldering
- Module dimensions (LxWxH): 47x34.5x2.5mm

Pin Description:
1: GND - ground pin
2: LED-K - negative terminal of backlight LED
3: LED-A - Backlight LED positive terminal
4: GND - ground pin
5: RST - reset signal line, active low
6: D/C - command/data selection terminal, L: command, H: data
7: DIN - data input signal line
8: CLK - Clock signal
9: VCC - screen working voltage (+2.8V~+3.3V)
10: VCC - screen operating voltage (+2.8V~+3.3V)
11: CS - chip select signal, active low
12: GND - ground pin
13: NC - floating
14: NC - floating
15: NC - floating
16: NC - floating
17: GND - ground pin
18: GND - ground pin