CPU socket tester for socket S1 (638 pins)

CPU socket tester for socket S1 (638 pins)

Features:
- Tests each pin of the processor socket individually and the electrical circuit to it for open-circuit and short-circuit
- It can help in detecting bad solder joint of processor socket or BGA chipset and for quality control after changing the BGA chipset
- Compatible with motherboards for AMD mobile processors K8 microarchitecture with CPU socket S1 (for example: Sempron Mobile, Athlon 64 Mobile, Athlon 64 X2 Mobile, Turion 64 MK series only, Turion 64 X2, Phenom II Mobile)

User manual:

1. Insert CR2032 battery into the tester (the battery is not included in the kit)
2. Disconnect the power supply (charger) and battery from the motherboard
3. Install the tester into the processor socket on the motherboard
4. If some LED indicator is not lighting up you can check the corresponding pin and the electrical circuit to it for open-circuit
5. If some LED indicator is lighting up brighter than the others you can check the corresponding pin and the electrical circuit to it for short-circuit
6. The LED indicators lighting up with normal brightness indicate that the corresponding pins and their electrical circuits are ok
7. If the LED indicators lighting up with low brightness it means that the tester's battery (CR2032) is exhausted
8. When the motherboard is powered on you can check CLK, RESET#, VCCA and other signals via an oscilloscope
9. Correspondence between the LED indicator numbers and the processor socket pins can be found in the datasheet accompanying the tester